Forge Fittings Product
- 45°Elbow(ASME B16.11-2016)
- 90° Elbow(ASME B16.11-2016 )
- 90° STREET ELBOW(ASME B1 6.11 -2011)
- BOSS(BS3799-1974)
- BULL PLUG(MSS SP-95-2006)
- BUSHING (ASME B16.11-2016)
- CAP (ASME B16 11-2016)
- CROSS (ASME B16.11-2016)
- FULL COUPLING (ASME B16.11-2016)
- HALF COUPLING (ASME B16.11 -2016)
- HEX HEAD PLUG (ASME B16.11)
- HEX NIPPLE (BS3799-1974)
- NIPPLE (ASTM A733-03-2016)
- REDUCER INSERT (MSS SP.79.2011)
- ROUNDED HEAD PLUG (ASME B16.11-2016)
- SOCKET WELD END UNION (MSS SP-83-2006)
- SQUARE HEAD PLUG (ASME B16.11-2016)
- SWAGED NIPPLE (MSS SP-95-2006)
- TEE (ASME B16.11-2016)
- THREADED END UNION (MSS SP-83-2006)
BULL PLUG
MSS SP-95-2006
Is a standardized pipe fitting designed to close or seal the end of a pipe. Compliant with the MSS SP-95-2006 standard, it ensures high-quality manufacturing and adherence to safety guidelines. This fitting provides a tight and secure closure, preventing any leakage in piping systems.
The bull plug is typically threaded, allowing for easy installation and compatibility with other MSS SP-95-2006 compliant components. With its reliable performance, this bull plug offers an efficient solution for sealing and terminating pipe ends in a wide range of industrial settings.
Dimensions in Millimeters.
Nom Pipe Size | D | B | BI | T | H | |||
Sch 40/STD | Sch 80/XS | Sch160 | XXS | |||||
1/8 | 10.3 | 51 | 9.5 | 1.73 | 2.41 | – | – | 14 |
13.7 | 51 | 11.0 | 2.24 | 3.02 | – | – | 14 | |
3/8 | 17.1 | 57 | 12.5 | 2.31 | 3.20 | – | – | 14 |
1/2 3/4 | 21.3 | 64 | 14.5 | 2.77 | 3.73 | 4.78 | 7.47 | 14 |
3/4 | 26.7 | 70 | 16.0 | 2.87 | 3.91 | 5.56 | 7.82 | 18 |
1 | 23.4 | 76 | 19.0 | 3.38 | 4.55 | 8.35 | 9.09 | 18 |
1-1/4 | 42.2 | 83 | 20.5 | 3.56 | 4.85 | 6.35 | 9.70 | 18 |
1–1/2 | 48.3 | 89 | 20.5 | 3.68 | 5.08 | 7.14 | 10.15 | 18 |
2 | 60.3 | 102 | 22.0 | 3.91 | 5.54 | 8.74 | 11.07 | 20 |
2–2/2 | 73.0 127 | 27.0 | 5.16 | 7.01 | 9.53 | 14.02 | 20 | |
3 | 88.9 | 152 | 28.5 | 5.49 | 7.62 | 11.13 | 15.24 | 20 |
4 | 114.3 | 178 | 32.0 | 6.02 | 8.56 | 13.49 | 17.12 | 20 |
(1) The threading conforms to the ASME B1_20.1 standard.
(2) The minimum wall thickness (T Min) adheres to the specifications of ASME B36.10M.
DIMENSIONAL TOLERANCES OF SWAGED NIPPLES
MSS SP-95-2006 (Unit mm)
Note 1 ; Prior to threading or groovin
Nominal Pipe Size | Overall Length | Outside Diameter at End | Fitting Wall Thickness | |
Square Cut Ends | Other End Connecti ons | |||
1/8 – 3/8 | +_1.5 |
| +_08 | Not less than 87.5% |
1/2 -1-1/2 | ±1.5 |
| +_1.5 | |
2 -2-1/2 | +_3. 0 | ± 8 | +1. 5 | |
3 – 4 | +_3.0 | +_0.8 | ±1.5 |
“Note 1: Before threading or grooving”