Forge Fittings Product
- 45°Elbow(ASME B16.11-2016)
- 90° Elbow(ASME B16.11-2016 )
- 90° STREET ELBOW(ASME B1 6.11 -2011)
- BOSS(BS3799-1974)
- BULL PLUG(MSS SP-95-2006)
- BUSHING (ASME B16.11-2016)
- CAP (ASME B16 11-2016)
- CROSS (ASME B16.11-2016)
- FULL COUPLING (ASME B16.11-2016)
- HALF COUPLING (ASME B16.11 -2016)
- HEX HEAD PLUG (ASME B16.11)
- HEX NIPPLE (BS3799-1974)
- NIPPLE (ASTM A733-03-2016)
- REDUCER INSERT (MSS SP.79.2011)
- ROUNDED HEAD PLUG (ASME B16.11-2016)
- SOCKET WELD END UNION (MSS SP-83-2006)
- SQUARE HEAD PLUG (ASME B16.11-2016)
- SWAGED NIPPLE (MSS SP-95-2006)
- TEE (ASME B16.11-2016)
- THREADED END UNION (MSS SP-83-2006)
CROSS
ASME B16.11-2016(Revision of ASME B16.11-2011)
Is a standardized pipe fitting, revised from ASME B16.11-2011, designed to provide a 90-degree branch connection between four pipes. This fitting allows for the smooth and simultaneous flow of fluids in multiple directions.
The threaded or socket-weld end connections enable easy installation and compatibility with other ASME B16.11 compliant components, offering a versatile and efficient solution for complex piping systems.
Socket Welding | ||||||
Nom , | B(2) | C(1) |
| D(2) | A(2) | J |
(Avg) | (Min) |
3000Lb
6 | 1/8 | 10.8 | 3.18 | 3.18 | 6.9 | 11.0 | 9.5 |
8 | 1/4 | 14.2 | 3.78 | 3.30 | 9.3 | 11.0 | 9.5 |
10 | 3/8 | 17.6 | 4.01 | 3.50 | 12.6 | 13.5 | 9.5 |
15 | 1/2 | 21.8 | 4.67 | 4.09 | 15.8 | 15.5 | 9.5 |
20 | 3/4 | 27.2 | 4.90 | 4.27 | 21.0 | 19.0 | 12.5 |
25 | 1 | 33.9 | 5.69 | 4.98 | 26.7 | 22.5 | 12.5 |
32 | 1-1/4 | 42.7 | 6.07 | 5.28 | 35.1 | 27.0 | 12.5 |
40 | 1-1/2 | 48.8 | 6.35 | 5.54 | 40.9 | 32.0 | 12.5 |
50 | 2 | 61.2 | 6.93 | 6.04 | 52.5 | 38.0 | 16.0 |
65 | 2-1/2 | 73.9 | 8. 76 | 7.67 | 62.7 | 41.0 | 16.0 |
80 | 3 | 89.8 | 9.52 | 8.30 | 78.0 | 57.0 | 16.0 |
100 | 4 | 115.2 | 10.69 | 9.35 | 102.3 | 66.5 | 19.0 |
6000Lb
16 | 1/8 | 10.8 | 3.96 | 3.43 | 4.0 | 11.0 | 9 .5 |
8 | 1/4 | 14.2 | 4.60 | 4.01 | 6.4 | 13.6 | 9.5 |
10 | 3/8 | 17.6 | 5.03 | 4.37 | 9.2 | 15.5 | 9.5 |
15 | 1/2 | 21.8 | 5.97 | 5.18 | 11.8 | 19.0 | 9.5 |
20 | 3/4 | 27.2 | 6.96 | 6.04 | 15.6 | 22.5 | 12.5 |
25 | 1 | 33.9 | 7.92 | 6.93 | 20.7 | 27.0 | 12.5 |
32 | 1-1/4 | 42.7 | 7.92 | 6.93 | 29.5 | 32.0 | 12.5 |
40 | 1-1/2 | 48.8 | 8.92 | 7.80 | 34.0 | 38.0 | 12.5 |
50 | 2 | 61.2 | 10.92 | 9.50 | 42.9 | 41.0 | 16.0 |
9000Lb
15 | 1/2 | 21.8 | 9.35 | 8.18 | 6.4 | 25.5 | 9.5 |
20 | 3/4 | 27.2 | 9.78 | 8.56 | 11.1 | 28.5 | 12.5 |
25 | 1 | 33.9 | 11.38 | 9.96 | 15.2 | 32.0 | 12.5 |
32 | 1–1/4 | 42.7 | 12.14 | 10.62 | 22.8 | 35.0 | 12.5 |
40 | 1-1/2 | 48.8 | 12.70 | 11.12 | 28.0 | 38.0 | 12.5 |
50 | 2 | 61.2 | 13.84 | 12.12 | 38.2 | 54.0 | 16.0 |
The socket’s wall thickness around its periphery must meet or exceed the listed values on average. However, in localized areas, minimum values are permissible.
Dimensions in Millimeters.
Threaded | |||||
DN | Nom | Length of Thread. | A | H | |
B(*) | L2(*) |
2000Lb
6 | 1/8 | 6.4 | 6.7 | 21 | 22 |
8 | 1/4 | 8.1 | 10.2 | 21 | 22 |
10 | 3/8 | 9.1 | 10.4 | 25 | 25 |
15 | 1/2 | 10.9 | 13.6 | 28 | 33 |
20 | 3/4 | 12.7 | 13.9 | 33 | 38 |
25 | 1 | 14.7 | 17.3 | 38 | 46 |
32 | 1-1/4 | 17.0 | 18.0 | 44 | 56 |
40 | 1-1/2 | 17.8 | 18.4 | 51 | 62 |
50 | 2 | 19.0 | 19.2 | 60 | 75 |
65 | 2-1/2 | 23.6 | 28.9 | 76 | 92 |
80 | 3 | 25.9 | 30.5 | 86 | 109 |
100 | 4 | 27.7 | 33.0 | 106 | 146 |
3000Lb
6 | 1/8 | 6.4 | 6.7 | 21 | 22 |
8 | 1/4 | 8.1 | 10.2 | 25 | 25 |
10 | 3/8 | 9.1 | 10.4 | 28 | 33 |
15 | 1/2 | 10.9 | 13.6 | 33 | 38 |
20 | 3/4 | 12.7 | 13.9 | 38 | 46 |
25 | 1 | 14.7 | 17.3 | 44 | 56 |
32 | 1-1/4 | 17.0 | 18.0 | 51 | 62 |
40 | 1-1/2 | 17.8 | 18.4 | 60 | 75 |
50 | 2 | 19.0 | 19.2 | 64 | 84 |
65 | 2-1/2 | 23.6 | 28.9 | 83 | 102 |
80 | 3 | 25.9 | 30.5 | 95 | 121 |
100 | 4 | 27.7 | 33.0 | 114 | 152 |
6000Lb
6 | 1/8 | 6.4 | – | 6.7 | – | 25 | 25 |
8 | 1/4 | 8.1 | – | 10.2 | – | 28 | 33 |
10 | 3/8 | 9.1 | – | 10.4 | – | 33 | 38 |
15 | 1/2 | – | 13.6 | – | 38 | 46 | |
20 | 3/4 | 12.7 | – | 13.9 | – | 44 | 56 |
25 | 1 | 14.7 | – | 17.3 | – | 51 | 52 |
32 | 1-1/4 | 17.0 | – | 18.0 | – | 60 | 75 |
40 | 1-1/2 | 17.8 | – | 18.4 | – | 64 | 84 |
50 | 2 | 19.0 | – | 19.2 | – | 83 | 102 |
65 | 2–1/2 | 23.6 | – | 28.9 | – | 95 | 121 |
80 | 3 | 25.9 | – | 30.5 | – | 106 | 146 |
100 | 4 | 27.7 | – | 33.0 | – | 114 | 152 |
Dimension B represents the minimum length of an impeccable thread. The total length of the functional thread, comprising B and threads with fully formed roots and crests, must meet or exceed the L2 requirement (effective length of external thread) prescribed by the American National Standard for pipe threads (ANSI / ASME B1.20.1).
DIMENSIONAL TOLERANCE OF ASME B16.11
ASME B16.11-2016(Unit : mm)
Item | Type of | Size | ||||
DN | 6 to 8 | 10 to 20 | 25 to 50 | 65 to 100 | ||
NPS | 1/8 to 1/4 | 3/8 to 3/4 | 1 to 2 | 2-1/2 to 4 | ||
Bore diameter of socket (B) | All types of | +0.4 | +0.4 | +0.4 | +0.4 | |
Bore diameter of fitting (D) | ||||||
±0.7 | ±0.7 | ±0.7 | ±1.4 | |||
Concentricity of bore (X) | ||||||
+ 0.8 | ||||||
Coincidence of axes (Y) | 1/200 Max | |||||
Center to bottom of socket (A) | 45° 90° Elbow | ±1.0 | ±1.5 | ±2.0 | ±2.5 | |
Bottom to bottom of socket (E) | Full Coupling | ±1.5 | ± 3.0 | ±4.0 | ±5.0 | |
Bottom to socket to opposite face (F) | Half Coupling | ±1.0 | ±3.0 | ± 4.0 | ±5.0 |